Wheel Immobilizers and Chocks Archive

Made in the USA by Marson International, LLC – Model # T200-2010LPR This HIGH QUALITY Low Profile wheel chock is only available in the 5.0″ wide black powder coat. It was designed for SPORT BIKES. Many of the sport bikes have very large rotors (brake disks), and low profile 17″ wheels. This combination creates a situation where the disks will hit the sides of the traditional higher profile wheel chocks. These low profile chocks can also be used with any motorcycle with a tire 120mm wide or smaller. These removable chocks are ideally suited for trailer installation, on either a wood or metal surface and are designed for quick installation and removal. It comes complete with all the necessary hardware and instructions. A nice feature is a one person install. Other style chocks require attaching underneath the floor. Marson’s mounting hardware is installed inside the trailer therefore making TOY HAULER installation a simple task. Most toy haulers are extremely difficult to access underneath because of various obstructions. When mounting a chock onto a pickup truck we prefer to avoid drilling holes in the trucks’ bed. We rather attach the chock to a piece of plywood first (approx. size 4 ft. wide by 20″ deep) and then let the edge of the plywood butt up against the trucks’ bulkhead.

Maxxtow heavy-duty, motorcycle stand with wheel chock comes with a fully adjustable wheel-locking system that can accommodate front or rear motorcycle wheel sizes from 15 inches to 22 inches.

The Adjustable Motorcycle Stand and Wheel Chock from Extreme Max Products is the perfect product to help you store or transport your motorcycle. Built with 12-gauge plated steel holding up to 1,800 lbs., the stand easily adjusts to fit a variety of tire sizes; up to 5.5” wide and 15” to 22” diameter. At its base, a rotating wheel chock locks the front tire into place against the stand’s cradle, while the support arm keeps the stand stable and offers an eye hook at either end for an easy tie down. Specifications: Height: 15.5” Maximum Cradle Width: 6” Base Width: 10” Support Arm Width: 35.25” Total Length: 35.5” Six positions for size adjustment Seven-hole mounting pattern Note: The Adjustable Motorcycle Stand and Wheel Chock is not intended as an unassisted stand for your motorcycle; straps are required for safely securing your motorcycle and are not included.

The adjustable wheel chock from Titan Ramps is the best way to secure your motorcycle to a truck or trailer for transport, or in your garage for storage. This package consists of 2 adjustable wheel chocks. It makes transporting much safer by locking in the front wheel of your motorcycle. Easily adjusts to fir most standard motorcycle wheels between 17″ and 21″ in diameter and up to 6-3/8″ wide. All hardware is included for quick and easy installation.

Features:
– Includes 2 adjustable wheel chocks 
– Fits Wheel Sizes: 17” – 21” 
– Heavy Duty Steel Construction 
– Includes all Mounting Hardware 
– Powder-coated finish 
– Easy to Install

Specifications
– Color: Yellow & Black 
– Base Dimensions: 15.4”X10.3” 
– Recommended for Wheel Size: 17” – 21” 
– Recommended tires size: up to 6-3/8″ wide. 
– Total Weight: 36 lb 
– Material: Steel

5.5″ Removable Wheel Chock – Black Model # T200-HDB Made in the USA by Marson International, LLC – This chock’s uniquely angled sides protect tire sidewalls. This will also prevent brake disc contact. The high quality wheel chock is designed to stabilize the front wheel of a motorcycle when transporting on a trailer or a pickup truck. The unique design allows this wheel chock to fit all tire sizes up to140mm (6.0″) wide. If your motorcycle has a 150mm wide tire we recommend a 6.5″ wide wheel chock or a versatile, self supporting, Condor Wheel Chock. They are available in our Amazon store. When using this chock for a narrow tire understand that sidewall clearance means little, your main concern is stopping forward motion. These removable chocks are ideally suited for trailer installation, on either a wood or metal surface and are designed for quick installation and removal. It comes complete with all the necessary hardware and instructions. A nice feature is a one person install. Other style chocks require attaching underneath the floor. Marson’s mounting hardware is installed inside the trailer therefore making TOY HAULER installation a simple task. Most toy haulers are extremely difficult to access underneath because of various obstructions. When mounting a chock onto a pickup truck we prefer to avoid drilling holes in the trucks’ bed. We rather attach the chock to a piece of plywood first (approx. size 4 ft. wide by 20″ deep) and then let the edge of the plywood butt up against the trucks’ bulkhead. If mounting the Marson Chock on a metal floor you will need a metal floor mounting kit. The metal floor kit costs $12.95 when purchased separately, but only $5.00 when purchased with a wheel chock because we credit you for the stock wood floor kit. To purchase a metal Floor Mounting kit please visit our Amazon Storefront. We will issue a post transaction credit for the price difference.

5.5″ Removable Etrack Wheel Chock – Stainless Steel T101-ETRACK – HDSS Made in the USA by Marson International, LLC – **This listing includes one wheel chock, one etrack mounting plate, and the hardware. Etrack sold separately. This chock’s uniquely angled sides protect tire sidewalls. This will also prevent brake disc contact. The high quality wheel chock is designed to stabilize the front wheel of a motorcycle when transporting on a trailer or a pickup truck. The unique design allows this wheel chock to fit all tire sizes up to 140mm (6.0″) wide. If your motorcycle has a 150mm wide tire we recommend a 6.5″ wide wheel chock or a versatile, self supporting, Condor Wheel Chock. They are available in our Amazon store. When using this chock for a narrow tire understand that sidewall clearance means little, your main concern is stopping forward motion. These removable etrack chocks are ideally suited for trailer installation, on either a wood or metal surface and are designed for quick installation and removal. It comes complete with all the necessary hardware and instructions. Please note: The etrack chocks will have about a 1/2″ gap between the chock and the floor where the chock overhangs the etrack. We are OK with the gap, however if you prefer extra stability it doesn’t hurt to attach a spacer made of wood or a similar material directly to the chocks plate.

Elasco Wheel Chocks are manufactured from the highest quality polyurethane to produce a hard wearing, high quality, outdoor grade wheel chock.

Wheel chocks are used to keep vehicles safely in place. Prevents vehicles from accidentally rolling and causing harm and damage.

Constructed of red highly visible outdoor grade polyurethane to provide a sure grip on virtually any surface.

Polyurethane is stronger than rubber, resists tearing, abrasion, ozone weathering.

This wheel chock allows for fast and easy placement of the tire and fits all sizes of tires used in cars, RVs, motorcycles, and trucks.

This wheel chock is available in 4 colors including black, yellow, orange or red.

Chocks are manufactured in California USA.

Trimax Locks And Security Tcl265 Whl Chock Lk Keyed Alike 2pk-S

Description The 12-gauge plated steel construction of this solid motorcycle stand allows it to accommodate up to 1800 lbs. while your bike stands in an upright position. The adjustable wheel lock fits front or rear motorcycle wheel sizes from 15″ to 22″ and a powder coat protects the stand from rust and corrosion. Pick one up today to keep your motorcycle upright and safe when not in use! •Powder-coated, 12-gauge, plated steel •1800 lb. capacity •Accommodates 3″ to 5″-wide wheel “footprint” Overall dimensions: 36″ L x 35-1/4″ W x 16-1/8″ H Wheel plate dimensions: 5-1/8″ L x 9-1/2″ W x 15-1/8″ H Wheel support dimensions: 8-13/16″ L x 7-7/8″ W