High Quality Tire & Wheel Tools Products

60mm “Tuner Series” lug nuts from Sickspeed. Forged from aircraft grade 7075 aluminum and hard anodized for long lasting brilliance, these extended lugs have a 60 degree conical seat and feature an open ended design. Weighing in at a mere 30 grams each, you get style and flair while reducing both your unsprung weight and rotational mass. Thread pattern of these lugs is 12X1.5mm. Threaded to 12X1.5mm Made from 7075 aluminum. Lugs weight 30 grams each. 60 degree conical style seat. 60mm long and 20mm wide. Installs with 19mm socket (NOT included). Slim design eliminates the need for spline drive lugnuts. Don’t forget to check out our other listings for parts and accessories to suit your ride. We are always expanding so keep an eye out for more supreme quality products from Sickspeed. NOTE: Listing is for 24 pieces ONLY. Check our OTHER listings for additional quantities. NOTE: Vehicle list is for REFERENCE ONLY , use the guide above to check fitment with your rims. To avoid damaging your product you MUST use a torque wrench. Under NO circumstances should this be installed with an impact driver. To avoid damaging your product, please use a 19MM 6-sided socket (Do NOT use a 12-sided socket).

All factory replacement style lug nuts for aluminum wheels are designed to meet or exceed OEM application standards.

The X-tended Fit X-Chock offers the same great function as the 28010 X-Chock but for Wide Track axle spacings. Some OEM trailers are building frame with up to a 15 inch tire spacing. The new X-tended Fit X-Chock will adjust out to 17″ to accommodate those speciality axle spacings. Common trailers with this configuration are: Bullet, PrimeTime, Passport, etc. One chock and one handle per box.

Gorilla Automotive Aluminum Lug Nuts are the ultimate in lightweight lugs. Each lug nut is manufactured to exacting standards from 7075 Cold Forged Aluminum for strength and durability and Anodized for beauty.

DP-Accessories brand wheel lug nuts are designed with precision machined threads and inspected using our multi-point quality control process. Our solid one piece lug nuts are made from heat treated steel and then cold forged to provide exceptional strength and reliability. Featuring triple chrome plating with essential layers of copper, nickel, and chrome to provide exceptional strength, beauty, and corrosion resistance.

These solid one piece lug nuts are designed to fit the factory aluminum wheels on wheels on many General Motors (GM) vehicles, including Buick (1975-1985), Chevrolet (1971-1981), Oldsmobile (1973-1981), and Pontiac (1970-1981). They are a direct replacement for General Motors (GM) factory part number 371674 and Dorman part numbers 9-100016.1, 611-248.1, and 611-248.

These OEM style lug nuts are intended for installation on factory aluminum wheels only. They are commonly installed on OEM snowflake wheels. Please verify thread size, seating, and lug style prior to purchase.

Wheel Locks and exclusive Mopar key codes helps ensure maximum protection. Available in one and two-piece styles, for both steel and aluminum wheels. Each Wheel Lock kit includes four or five chrome-plated locking nuts, and one exclusive Mopar key. Wheel Lock kits help protect against wheel and tire theft without effecting wheel balance. Genuine Fiat 500 accessories are designed specifically for Fiat 500 and Fiat 500C which means which ever accessories you choose will fit your Fiat 500 perfectly and will add the finishing touch. Don’t forget that all Fiat accessories and merchandise are covered by Fiat’s manufacturer warranty. When you select a genuine Fiat part you can rely on the high quality and effectiveness of the product and brand without having to guess if the product will work in sequence with your vehicle. These accessories are made to fit exactly for the vehicle.

Specifications:

-Installation Key Utilizes 1/2″ Drive

-Lug Height: 4.5″ inches tall | 114mm

-Thread Size: 14×1.5

**Wheels must have conical seat. if you’re unsure please contact us!**

All of our Lugs are made of the Highest quality steel. They are secured with a 60 degree tapered cone seat for snug secure fit. The mirror like finish will stand up to the elements and stay bright and shiny with proper up keep. Please know your receiving some of the HIGHEST QUALITY product the market has to offer, BUY WITH CONFIDENCE!

Supreme Engineering Technologies

50 Caliber Racing single piece, 4.5″ long extended spike lug nuts are made from heat treated, hardened steel and feature a tapered 60 degree acorn seat. They are compatible with most aftermarket lug centric wheels without lug nut covers. An extra long socket key is included for easy installation/removal. Give your car, truck or UTV an aggressive, road warrior look! Offered in sets of 24 and 32 lug nuts, with several colors to match any color scheme.

Specifications:

• Thread Pitch: 14×2.0mm RH Metric
• Seat Type: 60 degree acorn (tapered) seat
• Hex size: 3/4″ Hex, 19mm
• Overall Length: 4.5″
• Acorn diameter: 0.9″
• Head type: 1 Piece Extended Spike with closed end
• Material: Hardened SCM 435 Steel with Finish
• Set of 24 Spike Lug nuts
• Extra long socket key included with each set
• Comes in BLUE finish

Note:

• The vehicle list below is not intended to be a definitive list. Some vehicles below use different size lugs/thread pitch so make sure you measure your vehicle before purchasing. These lug nuts are designed to fit some factory and most after market wheels with 60 degree conical lug nut seats. They will not work with factory or aftermarket hub centric wheels. Use of air or electric impact gun will damage finish.

Fitment Guide:

• FORD
  • Ford F150 1/2 ton truck 2wd, 4wd (2001-2014)
  • Ford F250 3/4 ton truck 2wd, 4wd (1999-2002)
  • Ford F350 1 ton truck 2wd, 4wd (1999-2002)
  • Ford Excursion (1999-2002)
  • Ford Expedition (2003-2015)

• LINCOLN
  • Mark LT 2WD, 4WD (2006-2008)
  • Navigator (2003-2014)

Ford used 3 different size lugs/thread pitch during these years, depending on vehicle options, so make sure you measure your vehicle before purchasing!

No one likes wasting time squatting down and running from tire to tire trying to set each tire to the correct PSI for maximum off-road traction. If you frequently air down for off-road adventures, then J.T. Brooks Automatic Tire Deflators are exactly what you need. Once a set of J.T. Brooks Automatic Tire Deflators is calibrated to a desired PSI, they are ready to use time and time again. These tire deflators automatically and accurately deflate tires to a set PSI. Simply calibrate each automatic tire deflator, by following the included instruction card, and lock them in place with the lock nut, screw them onto each tire’s valve stem, and let them do the work. The deflators automatically shut off when the set PSI is reached. This saves the user much time and frustration. By screwing one deflator on to each tire, all tires can be deflated simultaneously. This allows the user to complete other tasks while all tires are deflating. The automatic feature of these tire deflators eliminates the need to manually deflate your tires, so you spend less time setting your tire pressure and more time off-road.

Tuner Series lug nuts from Sickspeed. Forged from aircraft grade 7075 aluminum and hard anodized for long lasting brilliance, these extended lugs have a 60 degree conical seat and feature an open ended design. Weighing in at a mere 40 grams each, you get style and flair while reducing both your unsprung weight and rotational mass. Protected by U.S patent# USD720208. Slim design eliminates the need for spline drive lug nuts. One threaded cap per lug / easy to swap out. Lugs are 60mm in length. Comes with FOUR locking lug nuts and key! Helps prevent wheel theft! Made from 7075 aluminum. Lugs weighs 40grams each. 60 degree conical style seat. Chariot inspired design. Don’t forget to check out our other listings for parts and accessories to suit your ride. We are always expanding so keep an eye out for more supreme quality products from Sickspeed. NOTE: Listing is for 20 pieces ONLY. Check our OTHER listings for additional quantities. NOTE: Vehicle list is for REFERENCE ONLY , use the guide above to check fitment with your rims. Thread pitch is 14X1.5 for the above listed vehicles. To avoid damaging your product please use a torque wrench, under no circumstances should this be installed with an impact driver.